Specifications

26
Mobile Mapping
The ProMark3 needs 2 or 3 seconds to open a feature, record
at least one epoch and close the file successfully. So when you
open a point feature, please record for 2 or 3 seconds before
closing the feature. To improve accuracy of point features, we
recommend recording for 30 seconds - or even longer for op
-
timal accuracy.
For jobs performed in post-processing mode, the time require-
ments are those defined above for Stop-and-Go and Kinematic
surveys keeping in mind that all GIS/Mapping jobs implicitly
use an OTF initialization.
Where to Find Information
This manual is designed to guide you through the ProMark3
Surveying and Mobile Mapping procedures as well as provide
general reference. You can find additional information in the
following documents:
ProMark3 Getting Started Guide: This manual describes the
basic procedures to start using ProMark3 in surveying and mo-
bile mapping. It also briefly explains how to download your
field data to the office software and how to process this data.
GNSS Solutions Reference Manual: This manual provides de-
tailed instructions for post-processing and presenting the data
collected by ProMark3.
MobileMapper Office User Manual: This manual provides de-
tailed instructions for interfacing the ProMark3 with your GIS.
Magellan Navigation FTP site: Many useful documents relat-
ing to the ProMark3 are available at the following FTP site:
ftp://ftp.magellangps.com/Reference Manuals/ProMark3