Specifications

267
Installing the ProMark3 RTK Firmware
For all ProMark3 units purchased before June 2007, and for
all those units purchased after this date without the RTK func-
tion, you first need to download the ProMark3 RTK firmware
from the Magellan FTP server. The firmware is available as a
zip file. Follow the instructions below:
- Download the zip file to your office computer.
- Extract the files from the zip file, making sure you pre-
serve the folder structure while doing this.
- Insert the ProMark3 SD card into the card reader of your
office computer. Delete all possible TXT files present on
the SD card.
- Copy the unzipped files and folders to the ProMark3 SD
card.
- Remove the SD card from the card reader and insert it into
the ProMark3.
- On the ProMark3, double-tap Utilities and then AutoLoader.
- Select in turn each of the TXT files listed in the Auto-
Loader window and each time, tap OK. For each TXT file,
let the unit complete the installation.
Getting ProMark3 Ready
for FAST Survey Installation
For all ProMark3 units purchased before June 2007, you need
to copy the installation files on the ProMark3 SD card before
starting the FAST Survey installation procedure. Follow the in
-
structions below:
- Browse the FAST Survey CD, or the Magellan FTP server,
to access the “FAST Survey.CAB” file corresponding to the
language you want to install.
- Copy this CAB file to the root directory of your ProMark3
SD card.
- Remove the SD card from your local card reader and insert
it into the ProMark3.
Then install FAST Survey as follows:
- On ProMark3 RTK, run the Install FAST Survey utility.
- Make sure the FAST Survey button is checked on.
- Tap Install and then let the unit complete the installation
of FAST Survey.
NOTE: To install datum grids, please see page 253.