Specifications

266
Installing New OS Languages (Chinese, French)
To install the Chinese or French version of the operating sys-
tem into your ProMark3, you need an office computer with a
card reader that is compatible with the SD card used in the
ProMark3.
Assuming the currently running ProMark3 operating system is
in English, follow the instructions below:
1. Insert the SD card from your ProMark3 into the SD card
reader on your office computer.
2. Copy the “language.CAB” file from the /Chinese/ or
/French/ folder to the root directory of the SD card.
3. After the file has been copied, remove the SD card from
the card reader and insert it back into the ProMark3.
4. Power on the ProMark3. Double-tap the “Utilities” and
then the “Install Language” icons.
5. Tap the Add button. The “language.CAB” file is automati-
cally copied to the ProMark3 RAM memory and then
installation begins. At the end of this phase, the “lan
-
guage.CAB installed successfully” message is displayed.
6. Tap OK.
7. Select “Chinese” or “French” from the Active Language
combo box and then tap on the OK button. A new message
(“Please reboot the device!”) asks you to turn off the
ProMark3.
8. Tap OK to close the message window, then OK again on top
of the screen to close the Install Language window.
9. Press the red key to turn off the ProMark3. When next turn-
ing on the ProMark3, the operating system and the utilities
(notably DGPS Configuration and Bluetooth Manager) will run
in Chinese or French. Note that most of the icons will keep
their original English names.