Specifications

256
seconds. Then depending on the radio modem used, the fol-
lowing screen is displayed:
With the US model, you can only change the channel number
(0.. 49).
With the European model, you can change both the channel
number (0.. 2) and the RTCM Rate (1 or 2). With RTCM
Rate=1, you are sure you will always meet the 10% duty cycle
requirement. With RTCM Rate=2, the radio may not always
meet this requirement.
Note that the settings of the serial line between ProMark3
RTK and the radio cannot be changed. These settings are as
follows: 9600 Bd, no parity, 8 data bits, no stop bit.
Install Language
This utility allows you to change the interface language used
by the operating system. Three languages are available in
ProMark3: English, Chinese and French.
ProMark3 units leaving the factory only have English installed.
To install the Chinese or French language, please refer to In-
stalling New OS Languages (Chinese, French) on page 266.
US model European model