Specifications

233
Real-time Fast Mode
This option allows you to define the way the received RTK
corrections are processed in the ProMark3 RTK.
Set this option to match your application. Some applica-
tions require the fastest possible position output rate
whereas some others can do with a slower ouput rate pro
-
vided the position accuracy is maximum.
Two settings are possible for this option:
• ON: Enables the real-time Fast mode. The last received
RTK corrections are extrapolated for the time when the
next RTK position solution is expected. The “ON”
option provides the fastest RTK position output rate
because it is insensitive to possible delays in the
reception of new RTK corrections from the base.
• OFF: Disables the real-time Fast mode. The ProMark3
RTK will wait until a new set of RTK corrections is
received from the base before it calculates a new RTK
position solution. With the “OFF” option used, the
RTK position output rate may be slowed down if for
some reason, the base experiences delays in transmit
-
ting its RTK corrections. However, this option gives
more accurate position solutions than with the “ON”
option.