Specifications

221
If you use Bluetooth however, you will have to launch Blue-
tooth Manager manually. For NTRIP or Direct IP for example,
you will have to do the following after launching DGPS Config
-
uration (skip step 8 for Direct IP):
1. Tap on the Settings button.
2. Tap and then
3. Double-tap the Dial-Up Networking shortcut icon to re-
assign a virtual port to Bluetooth. Tap OK to close the mes-
sage box.
4. Tap to minimize the Bluetooth Manager window.
5. Tap to access your GPRS Connection icon
6. Double-tap this icon and then tap Connect. After the con-
nection is active (Sound + “Connected”), tap Hide.
7. Tap to close the Connection window
8. Tap the Get Table button to recover the list of stations,
choose the desired one and tap OK.
9. Tap Connect. Once connected to the station, tap OK to
close the DGPS Configuration window.
Cell Phone Changes
Here are a few recommendations you should follow when sub-
stituting your current cell phone for a brand new one:
1. In Bluetooth Manager, delete the Dial-Up Networking short-
cut icon
2. In Bluetooth Manager, unpair your old cell phone (tap and
hold the corresponding icon and select Unpair)
3. In Bluetooth Manager, run a new search for Bluetooth-
enabled devices in order to let ProMark3 detect your new
cell phone.
4. In the GPRS Connection window, delete the icon corre-
sponding to your old cell phone.
5. In the GPRS Connection window, create a new connection
icon for the new cell phone.
By following these precautions, you make sure all the virtual
ports in ProMark3 are made available for new connections.