Specifications

219
Other RTCM Source
- Switch on the external device providing RTCM corrections
data.
If you want to use COM1 on ProMark3 or ProMark3 RTK to
communicate with the external device, connect the ade
-
quate serial cable between the two units.
- On the ProMark3 workspace screen, double-tap the DGPS
Configuration icon.
- Tap on the Select Mode button
- In the Select Differential Mode window, enable the Other
RTCM Source option. The Settings window opens to let you
configure the connection to the external source.
-In the Port field, on top of the screen, set the port through
which you will communicate with the external device. By
default, only the COM1 port, the only “physical” COM port
available on the ProMark3, is available. Note that COM1
will not be available from the list if it’s used by another
application.
Note that the Update button allows you to update the list of
available ports attached to the Port field. When selecting
Other RTCM Source and tapping OK, this update function is
automatically run so you don’t need to tap this button.
Typically, you need to use this button after you have
assigned a virtual port in Bluetooth Manager and the Set
-
tings window is already open.
- Tap the Configuration button to edit or view the settings of
the selected port. A Test button allows you to test the
availability of the port.
- Tap OK to close the Port Configuration window. This takes
you back to the Settings window.
- Tap OK and then Connect.