Specifications

214
Direct IP
Warning! Using Direct IP requires that you have previously fol-
lowed the entire procedure described in Step-by-Step Proce-
dure for Establishing a GPRS Connection Via Bluetooth on
page 198.
Important Notice! Once you are familiar with the GPRS connec-
tion procedure described on page 198, you don’t need to ac-
curately follow this procedure. Instead, make your Bluetooth
and GPRS connections directly from within the DGPS Config
-
uration utility, using the following buttons located on the Di-
rect IP Settings window:
- for Bluetooth Manager
- for GPRS
Assuming the GPRS connection is now active, do the follow-
ing to implement the Direct IP DGPS mode:
- On the ProMark3 RTK workspace screen, double-tap the
DGPS Configuration icon.
- Tap on the Select Mode button.
- In the Select Differential Mode window, enable the Direct
IP option.
- Tap OK. The Direct IP Settings window opens from which
you can store several Direct IP configurations. [With an
already active GPRS connection, note that the Bluetooth
and DialUp fields have been filled in accordingly.]
Each Direct IP configuration holds the key information
allowing ProMark3 RTK to connect to a given corrections
provider. Having the capability to save several Direct IP
configurations in ProMark3 RTK will therefore allow you to
quickly change the corrections provider without having to
re-enter the relevant connection parameters each time you
do that.
- To enter your first Direct IP configuration, tap
- Select New in the Direct IP Configuration field, tap on the
Add button and then enter the following parameters:
• Name: Direct IP Configuration Name (freely choose a
name)
• Host: IP address
• Port: Port number
(The last two parameters should have been passed on
to you by the correction provider.)