Specifications

205
4. In the Select a modem field, select the port used on
ProMark3 RTK (i.e. the port assigned previously) to com-
municate with the Bluetooth modem of the cell phone
(see screen example opposite; the selected modem should
be in the form “BT Modem on <CellPhoneName> COMx”).
5. Tap Configure and then enter the data line settings on the
Port Settings tab. Choose a baud rate that is greater than
the one used by the GPRS connection.
6. Tap OK to close the Device Properties window. Ignore the
warning message, if any. Simply tap OK to close this mes-
sage.
7. In the Modem window, tap Next>.
8. In the Phone Number field, type the GPRS call number
according to the instructions on page 198.
9. Tap Finish. A new icon appears in the Connection window
(see example opposite).
Step 6: Establish the GPRS Connection
1. Double-tap the icon you have just created in the connec-
tion window.
2. Enter the following parameters:
• User Name
• Password
• Domain
3. Enable the Save password option.
4. Tap on the Dial Properties button and then on the Edit but-
ton. This opens the Edit Dialing Patterns window.
5. Correct the content of this window in order to read “G” in
the three fields.