Specifications

202
Ask for a Paired Bluetooth Link
This procedure is for securing and quickly re-establishing the
Bluetooth connection between the two units.
1. Tap and hold the cell phone icon.
2. When a dotted circle appears, remove the stylus and, in
the menu that pops up, select
Pair. A new window opens in
which you should enter a pin number to secure the con-
nection to the cell phone (see below).
Enter a Pin Code
1. Tap inside the Pin field and type in any number. A two- to
four-figure number is recommended. You will have to
remember this number in step 2 below.
Note that this number may be different from the one
entered in the Bluetooth Properties dialog (see
PIN Code,
Detectability & Authentication on page 192).
2. Tap OK to enter the pin code and close the dialog box.
This causes the cell phone to display a message or menu
following the pairing request from ProMark3 RTK.
Step 2: Allow the Cell Phone to Be Paired with
ProMark3 RTK
On the cell phone, following the message triggered by the
pairing request from ProMark3 RTK, allow a new pair of Blue-
tooth devices to be created between ProMark3 RTK and the
cell phone:
1. Select the appropriate function depending on the cell
phone used. For example on the Sony/EricssonT68i, select
“Add to Paired”.
2. You will then be asked to enter the pin number you have
previously defined in ProMark3 RTK (see Step 1).
When the units have successfully been paired, a yellow
circle containing a padlock will appear on the cell phone
icon on ProMark3 RTK (see example opposite)
.