Specifications

194
To deactivate a local service:
• Tap in the Bluetooth Manager toolbar.
• Tap and hold the icon representing the local service
you want to deactivate and then select Stop. This
instantly stops the concerned local service.
Note that when you deactivate the File Transfer Ser-
vice or Object Push Service, you automatically deacti-
vate these two services.
To re-activate a local service:
• Tap in the Bluetooth Manager toolbar.
• Just tap and hold the concerned icon and then select
Start.
When you re-activate the Serial Port Service, Bluetooth
Manager asks you to select the COM number you want
to assign to the virtual port. Choose any port from the
list and then tap OK. A message indicates that the port
is now ready. Tap OK to close the message window.
To change the identification of the Bluetooth virtual port used
by the Serial Port service, the Serial Port Service must be
stopped first. When you re-start it, you can change the port
used as explained above.
Using the Serial Port Service
...
Using the File Transfer Service
Assuming you want to transfer files between two ProMark3
units, follow the procedure below, based on the use of
ProMark3’s File Transfer Service:
-On the host ProMark3, make sure:
• Its File Transfer Service is activated.
• Its File Transfer Service properties include the path
and name of the folder containing the files you want to
transfer to the inquiring ProMark3 (for example the
folder path and name are: \Application Data\Job101\).