Specifications

187
• If the map filename uses more than 8 characters,
MobileMapper Office will warn you that this name
will be truncated. Keep the truncated name or type a
different name and then click
OK.
• Wait until the uploading messages on the PC and
ProMark3 disappear.
• When the upload procedure is complete, press
MENU on the ProMark3, tap
Setup and then Select
Map.
• Tap in the Detail Map field and then select the name
of the file you have just uploaded
• Tap Save. ProMark3 starts loading the new map.
After a while, the Map screen is displayed.
• Use the IN, OUT and scrolling buttons to get a full
view of the new map on the Map screen.
2. If you select Upload to SD Card Reader, then:
• Click Next >.
• Select the drive letter corresponding to the local SD
card reader (e.g. “G:”)
• Click Next > again. MobileMapper Office indicates
the size of the map vs. the remaining memory space
on the SD card and the name of the background
map file.
• Click Finish if you agree. The background map file is
transferred to the SD card.
3. If you select Store on Hard Drive:
• Click Next >. MobileMapper Office indicates the size
of the map vs. the remaining memory space on the
hard disk, the folder where the file will be saved and
the name of the background map file.
• Click Finish if you agree. The background map file is
saved on the hard disk.