Specifications

185
To use the new geoid in the job:
- Tap Cancel to close the Data Transfer window.
-Select File>Job Settings.
- Tap on the GPS tab
- Tap on the Geoid Separation File: button. A new dialog lists
the files stored in the ... \FAST Survey\Data folder.
- Select “GSF Files” in the Type field. The list now shows
the file you have just uploaded.
- Select it and tap OK. The name of the geoid file used in
the job is now displayed underneath the Geoid Separation
File: button.
Upload Procedures from MobileMapper Office
Uploading a Vector Background Map
Vector background maps are generated from DXF, SHP or MIF
files imported in MobileMapper Office’s Map Editor.
Note that raster background maps CANNOT be uploaded to
ProMark3 in its current version.
It is all or part of the background map attached to MobileMap-
per Office’s Map Display area that can be uploaded.
The background map is output as an IMI file. The IMI file can
be directly uploaded to the ProMark3, or copied to the SD
card inserted in the local SD card reader, or stored on the PC
hard disk. In all cases, a connection to the ProMark3 is a pre
-
requisite to the upload sequence.
Assuming the ProMark3 unit has been connected to the PC via
the USB or RS232 cable, it has been turned on, you have dou
-
ble-tapped the Mobile Mapping icon and you have selected the
storage medium on which to upload the map, do the following
on PC side:
- Launch MobileMapper Office.
To attach the desired vector map to the Map Display area:
- Click
-On the Vector Maps tab, select this map from the left-hand
list and then click the Attach Map button.
- Click OK to close the window.