Specifications

180
- Check on the maps you want to upload. You can select
several vector maps and several raster maps. After you’ve
checked on your vector maps, please name the vector map
that will result from the merging of all these maps (see
screen above right).
- Click OK. The following messages will appear in succes-
sion during the upload procedure:
Preparing data..
Creating data
Creating output image file...
Connecting... USBx
Uploading to GPS
While the last message above is displayed, messages on
the ProMark3 screen informs you that the <map
name>.imi file and then the <map_name>.tif file are
being uploaded.
- When the file transfer is complete, press MENU, tap Setup
and then Select Map.
- Tap in the Detail Map field and then select the name of the
IMI file you have just uploaded.
- Tap in the Raster Map field and then select the name of the
TIF file you have just uploaded.
- Tap Save. ProMark3 starts loading the new maps. After a
while, the Map screen is displayed.
- Use the IN, OUT and scrolling buttons to get a full view of
the new maps on the Map screen. Only the rectangular
limits of the maps will appear if you zoom out too much.