Specifications

178
- Click OK. This opens the Upload Job dialog box.
- Define the content of the job you want to upload by
enabling one of the buttons in the upper-left corner. If
you have previously made a pre-selection of points in
the project, the first option will be automatically
selected.
- Name the job if the default name is inappropriate (the
default name is derived from the open GNSS Solutions
project name).
The dialog box also indicates the folder where the job
files will be created before effective transfer to the
ProMark3 RTK (default folder: <Open_project_folder>/
job/). The following files will be created:
• <job_name>.CRD
• <job_name>.FCL
• <job_name>.INF
• <job_name>.SCB
• <job_name>.SYS
- Check or clear the Write feature code list file as well
option depending on whether you want to make this
list available to the field operator or not.
- Click OK. This opens the Data Transfer window.
- Select the PC port connected to the ProMark3 RTK
(USBx) and then click
OK. The job is then uploaded to
ProMark3 RTK.
- When the transfer is complete, close the File Transfer
window on the ProMark3 RTK.