Specifications

177
Upload Procedures from GNSS Solutions
Uploading a Real-Time “Surveying” Job
See Uploading Points to ProMark3 on page 181. Uploading a
real-time job, later run with “Surveying”, amounts to upload-
ing the control points and/or target points you will need to per-
form this job in the field.
Uploading a FAST Survey Job
NOTE: Only through the USB cable can you upload a FAST
Survey job to ProMark3 RTK.
1. On the ProMark3 RTK:
- Clip the I/O module as shown opposite.
- Turn on the ProMark3 RTK.
- Connect the USB cable between the ProMark3 unit
and your PC.
- Double-tap the FAST Survey icon.
- Select File>6. Data Transfer. This opens the Data Trans-
fer window.
- At the bottom of this window, select “USB (COMx)”
from the COM Port combo box.
- Tap the SurvCom Transfer button. This opens the File
Transfer window.
2. On the PC:
- Run GNSS Solutions and open or create the project
containing the job you want to upload to ProMark3
RTK. At this stage, you can make a pre-selection of all
the points making up the job.
- In GNSS Solutions, select Tools>Preferences and make
sure Show RTK functions is enabled otherwise check it
and then click OK.
- From the menu bar, select Project>Upload Positions to
External Device.
- In the dialog that opens, select RTK Job in the left
pane and then FAST Survey data collector in the right
pane.