Specifications

169
Downloading RTK Data Collected With FAST Survey
NOTE: Use exclusively the USB cable to download the RTK
data collected with FAST Survey.
See About Download Procedures on page 162 before follow-
ing the instructions below.
1. On the ProMark3 RTK:
- Clip the I/O module as shown opposite.
- Turn on the ProMark3 RTK.
- Connect the USB cable between the ProMark3 unit
and your PC.
- Double-tap the FAST Survey icon.
- Select File>6. Data Transfer. This opens the Data Trans-
fer window.
- At the bottom of this window, select “USB (COMx)”
from the COM Port combo box.
- Tap the SurvCom Transfer button. This opens the File
Transfer window.
2. On the PC:
- Run GNSS Solutions and open or create the project in
which to download your RTK results.
- In GNSS Solutions, select Tools>Preferences and make
sure Show RTK functions is enabled otherwise check it
and then click OK.
- From the menu bar, select Project>Download Positions
from External Device.
- In the dialog that opens, select RTK Results in the left
pane and then FAST Survey data collector in the right
pane.
- Click OK. This opens the Data Transfer dialog box.
- Select the PC port connected to the ProMark3 RTK
(USBx) and then click OK. After a couple of seconds, a
new dialog appears listing the .crd job files stored in
the ProMark3 RTK.
- Click on the job you want to download. The name of
the selected job appears in the upper field.
- Click OK. The job is then downloaded to the project
open in GNSS Solutions. On the PC, a job folder is
created in the open project folder to store all the
downloaded files.