Specifications

167
Donwloading RTK Data from the Card Reader
- Extract the SD card from the ProMark3 and insert it into
the local SD card reader of your office computer.
- Run GNSS Solutions and open or create the project in
which to download your RTK results.
- In GNSS Solutions, select Tools>Preferences and make
sure Show RTK functions is enabled, otherwise check it and
then click OK.
-Select Project>Download Positions from External Device.
-Select ProMark3 Surveying and click OK. This launches the
Download Utility on the PC.
- On the menu bar, select File>Connect>PC Drive.
- In the combo box located in the upper left corner of the
Download window, just underneath the menu bar, select
the drive corresponding to the local card reader. The left-
hand part of the Download window now lists the files
stored on the SD card.
- Select the O-files you want to download
- Press the F5 key to start the file transfer.
- When the transfer is complete, close the Download win-
dow. This causes GNSS Solutions to import the vector
data into the open project.
If names of imported points already exist in the project,
GNSS Solutions will ask you whether you want to overwrite
them or not. If you choose “Yes”, the points in the project
will be overwritten. If you choose “No”, new points will be
created with the “~1” suffix (e.g. “A001” is the point in
the project and “A001~1” is the created point). After
answering all these questions, the imported points and
vectors will be seen in the open GNSS Sollutions project.