Specifications

155
When these 20 points are listed, ProMark3 indicates the bear-
ing and distance to your current position from the first point
in the list. You can change the point from which the nearest
points are found. With the Nearest To field now highlighted,
press ENTER and scroll to the category where this new point
can be found. Select a new point and press ENTER. If you
have already pressed the arrow keys and one of the nearest
points in the list is highlighted, use the ESC button to scroll
back to the Nearest To field.
Selecting a GIS Feature as the Destination Point
Assuming a GIS job is open and contains already logged fea-
tures:
- Press NAV until the Map screen is displayed.
- Using the IN and OUT buttons, adjust the scale in such a
way that you can see the feature you want to go to.
- Using the stylus, tap this feature. You know that the cursor
is positioned over the feature when the “Cursor” indica-
tion at the bottom of the screen is replaced with the name
of that feature. You may use the arrow keys to refine the
position of the cursor over the feature.
- Press ENTER. A new screen appears giving the current
description of the feature. At the bottom of the screen,
simply tap Goto to enable the Goto function with this fea
-
ture as your destination. Then select your favorite naviga-
tion screen, using the NAV button, and navigate to this
feature.
Selecting a GIS feature as
the destination