Specifications

Real-Time Surveying

With a ProMark3 RTK, or after upgrading your ProMark3 into

a ProMark3 RTK (see Installing the ProMark3 RTK Firmware

on page 267), you can perform real-time RTK surveys. The

system will deliver centimeter-accurate positions thanks to

Magellan’s new BLADE™ technology.

From an L1-only GPS receiver such as the ProMark3, BLADE

can deliver RTK accuracies comparable to those of a dual-fre-

quency (L1/L2) receiver. Compared to dual-freaquency receiv-

ers however, initialization times are longer, and the operating

range limited to about 1 mile with the base/rover configura-

tion, and up to 10 kilometers with the rover-only configura-

tion.

Mobile Mapping

The ProMark3 receiver enables you to map and describe GIS

features and then format the data so that later it can be up-

loaded to a GIS. It offers an easy-to-use and easy-to-deploy so-

lution for general mapping and for asset management.

ProMark3 combines all the navigation capabilities with fea-

ture attributing software to support GIS data collection in the

field.

Office Software

The ProMark3 System operates in conjunction with GNSS So-

lutions, Magellan’s highly-automated office software.

GNSS Solutions is a complete, easy-to-use software package

which manages and processes both raw GPS and real-time da-

ta, deriving precise positioning data and presenting the results

in easily understood report formats.

The ProMark3 receiver also operates in conjunction with Mo-

bileMapper Office. This office software operates as the inter-

face between ProMark3 and your GIS. MobileMapper Office is

also used to refine feature positions for all those field jobs run

in post-processing mode.