Specifications

138
If you cannot physically occupy this point, but can
make the necessary visual observation, you should do
so and record an offset estimating the distance and
bearing to the grid point. If you are recording measure
-
ments made by an instrument, you should NOT record
an offset but rather try to make a recording as close as
possible to the position.
- When you have occupied as many of the grid points as
you can and recorded the necessary observations and
measurements at each, tap
Done at the bottom of the
Logging screen.
- Tap No when ProMark3 asks you to go to the next grid
point.
- Press the LOG button and tap Yes to close the job.
11.Closing the Job
To close a job, from the screen showing the list of attributes,
tap Done then confirm by tapping Yes.