Specifications

136
When you change the definition of a grid, ProMark3
always assumes that you are standing in the corner of
the grid from which you can see the grid extend in
front of you and to the right.
The definition of a grid is based on the following four
parameters:
Spacing: Distance between any two consecutive way-
points in any row or column (default: 50 meters or
100 feet, depending on the units used)
Columns: Number of waypoints along the axis facing
you (default: 10; Max.: 100)
Rows: Number of waypoints along the axis perpen-
dicular to the direction you are facing (default: 10;
Max.: 100)
Heading: Direction you face when the grid’s columns
extend in front of you and the rows extend to your
right
.
- To change the above parameters, use the up/down
arrows to move the cursor to each of these fields, press
ENTER and edit the field using either keyboard. When
you are done with the definition of a field, press
ENTER. Then press the down/up arrow to access the
next field, etc.
- Record an observation or measurement: Tap OK at the
bottom of the screen
. This takes you to the Logging
screen that indicates that you have begun logging data
to the feature and that the receiver is ready to log the
feature's attributes. Remember that you remain sta
-
tionary for all point features. Describe the feature as
you would any other point feature.
Heading=21°
North
(Heading= 0°)
Column
Row
North
Column
Row
Spacing
Spacing
In the two examples above:
Columns=8
Rows=6