Specifications

1
1. Introduction
What are the ProMark3 and ProMark3 RTK
Systems?
ProMark3 is a complete GPS system providing precision sur-
veying in post-processing or real-time, GIS feature collection
and navigation. Real-time surveying is only available with
ProMark3 RTK.
A typical ProMark3 system used in post-processing surveys in-
cludes two ProMark3 GPS receivers, GPS antennas, and all
ancillary components (see picture below) required to get you
up and running and producing quality data in a minimum
amount of time.
Post-Process Surveying
The ProMark3 system utilizes standard tripods or fixed-height
GPS tripods to position system components above a given sur-
vey point. The ProMark3 receiver collects signals broadcast
from GPS satellites, and stores this information in its internal
solid-state memory or an SD Card. The collected data is ex-
tracted from the ProMark3 receiver via a cable to an office
computer for post-processing.
In this manual, the term
“ProMark3” refers to
both the ProMark3 and
ProMark3 RTK units.
When describing a func-
tion specific to the
ProMark3 RTK, then the
term “ProMark3 RTK” is
used.
x 2