Specifications

131
Assuming you are logging a line feature and the Logging
screen is displayed, do the following, for example to nest a
point feature:
- Tap Options and then Pause <feature name>. This pauses
the logging of the line feature.
- Tap Options again and then Nest Feature
- Move to the location of the feature you want to nest
- In the Feature List screen now displayed, tap the fea-
ture type you want to nest.
- Tap Log to start logging this feature.
- Describe the attributes of the feature as explained
above
- Tap Done when you have finished logging the nested
feature.
- Tap Options and then Resume <feature name>. This takes
you back to the Logging screen from which you can
normally finish the logging of the line feature.
8. Offsetting a Point Feature
Sometimes the feature you want to put on the map is in
area of poor GPS reception or is not accessible. This is
when you can map the feature using the offset utility. By
combining the receiver’s position with the bearing and dis
-
tance to the feature, ProMark3 will automatically calcu-
late and record the position of the feature.
To input an offset for a point feature, assuming the Fea-
ture List screen is now displayed, do the following:
- Tap one of the listed point features available from the
selected feature library.
- Tap Log to start logging the feature
- Tap Options and then Offset.