Specifications

121
• Select “Kinematic” as the Survey mode
• Select “Known” in the Initialize field, then tap the Site ID
corresponding to the “intermediate” control point (remem-
ber in our example you named that point “CP10”).
• Tap Log and wait for the Remain field to countdown to zero.
• Walk to the beginning of the trajectory you were surveying
when the alarm message occurred.
• Press the LOG key, rename the Site ID.
• Tap Log to resume the survey of the trajectory you have not
been able to complete the first time.
Quitting the Surveying Function
Press the MENU key and tap Exit. This takes you back to the
ProMark3 workspace screen.