Specifications

116
Information provided here will help you monitor the survey
of the trajectory.
• Obs. Range (Observation Range): Field left blank as it
is irrelevant to Kinemativ survey.
• Elapsed: Displays the time elapsed, in hours, minutes,
seconds, since you tapped the Log button (at the beg-
ginning of the trajectrory).
• # Sats: Displays the current number of healthy satel-
lites – seen above the elevation mask – being logged
into memory.
• PDOP: Displays the PDOP value at any given time,
computed from all observed healthy satellites above
the elevation mask.
• Site ID: Indicates the name of the last logged position
along the trajectory.
• File Name: Indicates the name of the file in which data
is being collected. The file is automatically named by
the receiver according to conventions provided in
Appendices on page 262.
• Current Power and Memory statuses in graphical form.
As you are progressing along the trajectory, the content of
the Site ID field will be incremented by 1 at the recording
interval rate (increment: 0 to 9, then A to Z, then 0..
again, etc.).