Specifications

113
• Site ID: Set this parameter according to the initializa-
tion method you choose:
-If <None> or Bar is selected, you can freely enter a Site
ID from the keyboard.
Tap inside the field and enter
a 4-character string using the virtual (on-screen) or
real keyboard. Then press the ENTER key, or tap
on the on-screen keyboard, to validate the site
ID.
-When you select Known, the receiver prompts you to
choose a Site ID from the list of existing control
points. Tap the desired Site ID.
• Site Description: (Optional) Tap inside the field and
enter a narrative description of the point (20 charac-
ters max.). Then press the ENTER key, or tap on
the on-screen keyboard, to validate the content of this
field.
When several Site Descriptions have previously been
defined, you can quickly retrieve these by tapping the
left arrow to the right of the field. The list of existing
descriptions then appears in which you can tap the
desired one. This automatically sets the Site Description
field on the Survey Settings screen.
• Time on site (sec): If Bar or Known is selected as the Ini-
tialization method, enter the occupation time on site,
in seconds, required for initialization. If you select
<None>, this field is removed from the screen.
Initialization Phase
7. Tap the Log button at the bottom of the screen. This starts
data collection which will stop only at the end of the Kine-
matic survey. So be sure from now on, and until the end of
the survey, that you will not mask the antenna.
Carefully choose the Site
ID!
Remember ProMark3 will
automatically increment
the Site ID as you progress
in your Kinematic survey.
So make sure the Site ID
you choose will not gener-
ate Site IDs that already
exist. If that was the case,
ProMark3 would overwrite
these Site IDs without
warning you.