Specifications

105
If you are performing ini-
tialization on bar, you
now have to move the
rover antenna from the
initializer bar to the top
of the rover pole (see
illustration opposite).
While doing this, take
care not to mask the rover
antenna or else you would
have to resume the ini
-
tialization.
•With <None> selected,
because there is no ini
-
tialization phase,
ProMark3 directly
switches to data collec
-
tion. Continued in next
chapter Data Collection.
Data Collection
8. Walk to the 1st point you want to survey, making sure you
will not mask the antenna.
9. If you have initialized on bar or known point, you may
need to change some of the survey settings (typically you
need to change the antenna height after moving the rover
antenna from the initializer bar to the pole).