Specifications

103
• Site ID: Set this parameter according to the initializa-
tion method you choose:
-If <None> or Bar is selected, you can freely enter a
Site ID from the keyboard.
Tap inside the field and
enter a 4-character string using the virtual (on-
screen) or real keyboard. Then press the ENTER
key, or tap
on the on-screen keyboard, to vali-
date the site ID.
- When you select Known, the receiver prompts you to
choose a Site ID from the list of existing control
points. Tap the desired Site ID.
• Site Description: (Optional) Tap inside the field and
enter a narrative description of the point (20 charac-
ters max.). Then press the ENTER key, or tap on
the on-screen keyboard, to validate the content of this
field.
When several Site Descriptions have previously been
defined, you can quickly retrieve these by tapping the
left arrow to the right of the field. The list of existing
descriptions then appears in which you can tap the
desired one. This automatically sets the Site Description
field on the Survey Settings screen.
• Time on site (sec): If Bar or Known is selected as the Ini-
tialization method, enter the occupation time on site,
in seconds, required for initialization. If <None> is
selected as the Initialization method, enter the occu
-
pation time required on the first point you want to sur-
vey.
Carefully choose the Site
ID!
Remember ProMark3 will
automatically increment
the Site ID as you progress
in your Stop-and-go sur-
vey. So make sure the
Site ID you choose will not
generate Site IDs that
already exist. If that was
the case, ProMark3 would
overwrite these Site IDs
without warning you.