Specifications

• # Sats: Displays the current number of healthy satel-

lites – seen above the elevation mask – being logged

into memory.

• PDOP: Displays the PDOP value at any given time,

computed from all observed healthy satellites above

the elevation mask.

• Site ID: Reminds you of the name you have given to the

point you are surveying.

• File Name: Indicates the name of the file in which data

is being collected. The file is automatically named by

the receiver according to conventions provided in

Appendices on page 262.

• Current Power and Memory statuses in graphical form.

8. When according to the Obs. Range parameter on the rover,

enough data has been collected in this observation session

(this implies that you must have a rough idea of the dis-

tance between the base and the rover), tap the Done but-

ton at the bottom of the screen or press the ENTER key.

9. Follow the steps presented above for each observation ses-

sion required to complete your survey. After data collec-

tion is complete, take all ProMark3 receivers used in the

survey to the office and download the data to an office

computer as described in Processing Field Data Collected

With “Surveying” on page 164. The data is now ready for

post-processing using GNSS Solutions.

NOTE: If the base used is not a ProMark3 base, Magellan

recommends you double the occupation times.