Specifications

After the transfer is complete, notice in the right side

of the Download window that each downloaded file has

been split into different files named with different pre

fixes (see opposite).

- Close the Download window.

5. On ProMark3, quit the Surveying function, turn off the

receiver and remove the cable between the PC and

ProMark3.

6. Repeat the previous 5 steps for each of the ProMark3

units involved in the project to download their respective

files to the same project folder on your office computer.

Note that you can also download your field data from the

SD card that you have previously removed from the

ProMark3 and inserted into the local SD Card reader. The

procedure is the same as above except that there is no

connection to a remote device needed.

Files resulting from the

downloading of an

observation file are named

as follows:

X<Downloadedfilename>

where prefix X = “E” for

Ephemeris Data, “B” for

Position Data, “D” for GPS

Raw Data and “W” for

SBAS Data.