Specifications

80
4. On the PC:
- From the Windows task bar, select Start>Pro-
grams>GNSS Solutions>Tools>Download.
(Double-click in the right side of the window if
you want to change to the parent directory and open
your project folder on the PC.)
- In the Download window, select File>Con-
nect>Receiver>Connect via Cable. This opens the Con-
nect Via Cable dialog.
- In this dialog, choose the port created on the PC fol-
lowing the installation of the USB driver and then click
OK. (If you use an RS232 cable, just select the corre-
sponding port number and click OK). The following
appears successively in the status bar, at the bottom of
the window:
Looking for remote on COMx at xxxx Baud...
Connected to Data Source
Setting Baud rate...
Preparing for listing...
Directory has been listed
The left side of the Download window then lists the
files present in the ProMark3.
- Select the files you want to download. If necessary,
hold down the Ctrl key to make a multiple selection.
- Press the
F5 key or drag and drop the selected files
from the left to the right side of the window. A Copying
file dialog appears during data transfer.
It is very important that you
connect the ProMark3 to
the PC BEFORE running
Download.
If you have some difficulty
identifying which port
number should be selected
as the USB port, first run
Download WITHOUT the
USB connection to
ProMark3 in order to list
the available ports. Then
quit Download and resume
the operation after
connecting ProMark3. An
additional port will then
appear in the list. This
additional port is precisely
the port you need to select
to allow communication
with ProMark3 via USB.