Specifications

27
Initializing GPS
Take the receiver to a location where there is a clear view of
the sky, then:
- From the ProMark3 workspace, double-tap successively
the Utilities icon and then the GPS Init icon.
- Scroll down the list of continents and double-tap the con-
tinent where you are located (see figure below, left.) Simi-
larly double-tap the country where you are located. Finally
indicate the current time and date (see figure below,
right.)
and click OK.
The very first initialization of a GPS receiver may take a few
minutes.
Initialization can be faster if you know the approximate coor-
dinates of your current location. Rather than select your con-
tinent on the figure above left, just tap the Enter Coordinates
button on this screen, then enter the approximate coordinates
of your location plus the date and time and then tap OK. This
will speed up the initialization phase.
Please Go Outside to Per-
form Initialization!
Initialization is required
when 1) the receiver is
brand new, 2) you have
moved more than 500
miles from the last place
you were using it, 3) mem-
ory has been completely
erased or 4) the receiver
has not been used for more
than a few months.