Specifications

Automatic System Time Update

ProMark3 will automatically update the system date & time

using the GPS time determined by the integrated GPS receiver

and the time zone that you specify. To set the time zone:

• In the ProMark3 workspace, double-tap the Settings icon.

• Double-tap the Date/Time function. This opens the Date/

Time Properties screen.

• Set the time zone field (see opposite) and then select OK

on top of the screen.

Please note that you should wait for a few seconds, after

turning on ProMark3, before system time can effectively

be updated.

Adjusting the Backlight

To switch the backlight on/off for both the keypad and display,

or to adjust the brightness and screen contrast, double-tap the

Settings icon on the ProMark3 workspace and then double-tap

the Backlight Control function.

To conserve battery power, we recommend you to switch the

backlight off whenever possible.

For other settings, please refer to Setup Menu on page 149.