Specifications

196
Upload/Download Procedures (Summary)
Surveying
Mobile Mapping
(1) Use MENU>Setup>Storage on ProMark3 to select the storage medium
used.
(2) From fastest to slowest data transfer method: 1) via Local SD card reader,
2) via USB, 3) via RS232.
(3) ProMark3 must be connected via USB or RS232 to allow MobileMapper
Office to generate the map specifically for use in ProMark3.
(4) SD card extracted from ProMark3 to be inserted in the local SD card
reader.
(5) SD card later inserted in the ProMark3 for use in the field.
Download From To Using (2) See
Survey Data
Files
ProMark3 (from SD card
or internal memory) (1)
Project folder using
Download utility
USB or RS232 link Page 79
Survey Data
Files
SD Card (in local SD card
reader) (4)
Project folder using
Download utility
Local SD card
reader
Page 82
Upload To From Using (2) See
Vector Back-
ground map
ProMark3 (to SD card or
internal memory) (1) GNSS Solutions
USB or RS232 link
Page 84
Control Points
ProMark3 ( to internal
memory only)
GNSS Solutions USB or RS232 link
Page 86
Download From To Using (2) See
GIS data files
ProMark3 (from SD card
or internal memory) (1)
Job folder using
MobileMapper Trans-
fer utility
USB or RS232 link
Page 111
GIS data files
SD Card (in local SD card
reader) (4)
Job folder using
MobileMapper Trans-
fer utility
Local SD card
reader
Page 113
Upload To From Using (2) See
GIS job and
waypoint files
ProMark3 (to SD card or
internal memory) (1)
MobileMapper Office
USB or
RS232 link
Page 121
GIS job and
waypoint files
SD card (in local SD card
reader) (5)
MobileMapper Transfer
Local SD card
reader
Page 122
Vector Back-
ground map
ProMark3 (to SD card or
internal memory) (1)
MobileMapper Office
USB or
RS232 link
Page 118
Vector Back-
ground map (3)
SD Card (in local SD card
reader) (5)
MobileMapper Office
Local SD card
reader
Page 118
Vector Back-
ground map (3)
PC hard disk MobileMapper Office N/A Page 118