Specifications

190
Using Another RTCM Source
You can use another equipment used as the RTCM source. In
this case, see the manufacturer’s instructions to know how to
connect this equipment to the ProMark3. On ProMark3 side,
you just need to:
-Run the DGPS Config utility
-On the Mode tab, tap Other RTCM Source
- Then tap Open Port, select the port used, make the neces-
sary settings and tap OK.
- Tap OK to close the DGPS Configuration window. A mes-
sage will tell you that the RTCM source is now used in
ProMark3.