Specifications

English
43
You can configure the MobileMapper CX handheld to automat-
ically enter each mode when it has been idle for a specified
time.
To change the idle time, tap Power in the Control Panel.
Then make the necessary changes in the Schemes tab (see op-
posite.)
NOTE: The amount of time displayed in the User Idle field
must be less than the amount of time displayed in the System
Idle field. And the amount of time displayed in the System
Idle field must be less than the amount of time displayed in
the Suspend field.
Turning Off MobileMapper CX Manually
Tap , then Shut Down. In the Shut Down window that
opens, just tap OK. After a few seconds, the MobileMapper CX
will shut down.
Checking Battery Status
To check the battery level, tap , then Settings>Control pan-
el>Power. See screen example below.
LED Indicators
The charge LED will give charging information only if the re-
ceiver is on.
Power LED (Green) Indicates:
Off Device Switched Off
Solid Green Power On
Charge LED (Amber) Indicates:
Off Not charging
Solid Amber Battery is fully charged
Blinking Amber Battery is charging
Power
Charge