Specifications

English
25
4. In the Select a modem field, select the port used on
MobileMapper CX (i.e. the port assigned previously) to
communicate with the Bluetooth modem of the cell phone
(see screen example opposite; the selected modem should
be in the form “BT Modem on <CellPhoneName> COMx”).
5. Tap Configure and then enter the data line settings on the
Port Settings tab. Choose a baud rate that is greater than
the one used by the GPRS connection.
6. Tap OK to close the Device Properties window. Ignore the
warning message, if any. Simply tap OK to close this mes
-
sage.
7. In the Modem window, tap Next>.
8. In the Phone Number field, type your GPRS call number
(see Introduction on page 18).
9. Tap Finish. A new icon appears in the Connection window
(see example opposite)
.
Step 6: Establish the GPRS Connection
1. Double-tap the icon you have just created in the connec-
tion window.
2. If you don’t need to enter your connection profile, skip to
step 3 (see
page 18). If you need to enter your GPRS con-
nection profile, enter the three parameters below and
enable the Save password option:
• User Name
• Password
• Domain
3. Tap on the Dial Properties button and then on the Edit but-
ton. This opens the Edit Dialing Patterns window.
4. Correct the content of this window in order to read “G” in
the three fields.