Specifications

English
23
Step 3: Re-Boot MobileMapper CX’s Bluetooth
Manager
This step is required for all the changes you have just made to
take effect.
1. In the task bar, tap and then select Exit. This instantly
stops Bluetooth Manager and closes the window.
2. Double-tap the Bluetooth Manager icon in the still open
Control Panel window. The Bluetooth window appears on
the screen after a few seconds.
NOTE: Keep the cell phone on during this step.
Step 4: Establish a Bluetooth Link Between Mo-
bileMapper CX and the Cell Phone
List the Cell Phone’s Local Services
1. Tap . The cell phone icon appears instantly and you
can see a yellow circle included indicative of an active
pair of Bluetooth devices.
2. Double-tap the cell phone icon. The Bluetooth Manager
window now shows the Bluetooth services offered by your
cell phone (see example opposite)
.
Establish a Bluetooth Connection
1. Double-tap the Dial-Up Networking icon. As a result, a
connection is automatically implemented using the first
Bluetooth virtual port available on MobileMapper CX. The
message “
Connection succeeded on communication port
COMx:
” is displayed.
NOTE: COM1 is the only physical COM port on
MobileMapper CX. COM2 is an internal virtual port and
COM3 is automatically assigned as the first Bluetooth vir
-
tual port at power on. So when you double-tap the Dial-Up
Networking icon, COM4 is normally the port used for that
connection.