Specifications

English
42
Turning Off MobileMapper CE Manually
Tap , then Suspend. In the Shut Down window that opens,
just tap OK. After a few seconds, the MobileMapper CE will
shut down.
Checking Battery Status
To check the battery level, tap , then Settings>Control pan-
el>Power. See screen example below.
LED Indicators
The charge LED will give charging information only if the re-
ceiver is on.
Memory Management
The MobileMapper CE has three types of memory:
- The Nand Flash memory (“MyDevice”), a non volatile
memory.
- The removable SD Card memory, a non-volatile memory.
- The RAM (volatile memory), mainly used for running pro-
grams.
Programs or data that are saved in the RAM will be erased
when the system is switched off!
We recommend that you install programs on “MyDevice” and
store your data on SD card.
Power LED (Green) Indicates:
Off Device Switched Off
Solid Green Power On
Charge LED (Amber) Indicates:
Off Not charging
Solid Amber Battery is fully charged
Blinking Amber Battery is charging
Power
Charge