Specifications

English

Note that the screen includes a More Details button allow-

ing you to view the properties of the selected station. Tap

on this button. The NTRIP Station Details screen is dis-

played on which you can use the following buttons:

• Previous and Next to view the properties of respectively

the previous and next stations from the list of stations

provided by the caster.

• Select to select the station whose properties are cur-

rently displayed. This takes you back to the NTRIP

Settings screen on which you can now see the name of

this station in the Station field.

• Cancel to return to the NTRIP Settings screen without

changing the choice made in the Station field.

- Set the Real-Time Correction Age Limit parameter (see rec-

ommendations on page 63).

- Tap OK. This takes you back to the DGPS Configuration

window. On top of the screen, you can read part of the set-

tings you have just made.

- Tap the Connect button. The DGPS Configuration screen

now indicates the amount of incoming data packets (bot-

tom of the screen) as well as the status of the DGPS mode

(top of the screen).

- Tap OK to close the DGPS Configuration window. The fol-

lowing two messages are displayed successively: “Please

wait...” and “Processing incoming data packets...”.

- Tap OK to close the message window.

- Run GPS Status (see Viewing Current GPS Status on

page 14) and check that MobileMapper CE is now operat-

ing in DGPS mode.

- Start your application.