Specifications

English

NOTE: COM1 is the only physical COM port on

MobileMapper CE. COM2 is an internal virtual port and

COM3 is automatically assigned as the first Bluetooth vir-

tual port at power on. So when you double-tap the Dial-Up

Networking icon, COM4 is normally the port used for that

connection.

2. Tap OK to close the message window. Note the presence of

a plug in a green circle on the Dial-Up Networking icon

showing that the connection is effective (see opposite).

Create a Shortcut for Future Connections

This shortcut will allow you to save time for future connections

as you won’t have to list the local services of the cell phone to

re-activate the Bluetooth link. Instead you will just have to

double-tap the shortcut.

1. Tap and hold the Dial-Up Networking icon. When a dotted

circle appears, remove the stylus and, in the menu that

pops up, select Create Shortcut. A message “Shortcut suc-

cessfully saved” appears after a few seconds.

2. Tap OK to close the message window.

3. Tap to view the shortcut you have just created.

4. Tap

to minimize the Bluetooth Manager window.

Step 5: Prepare the GPRS Connection

1. In the task bar, tap >Settings>Network and Dial-up Con-

nections.

2. In the window that opens, double-tap the Make New Con-

nection icon.

3. Name the new connection (for example “My Cell Phone”)

using the virtual keyboard, keep Dial-Up Connection

checked on and then tap Next>.