User guide

12 User Guide
Remote Controls
Your security system supports three types of remote controls; the REM1, REM2, and REM3. The REM1 is the
most basic remote control, with the ability to perform five actions (e.g. arming, disarming, activating a PGM,
etc.). The REM2 is more advanced, as it performs up to six different actions, as well as provides visual and
auditory feedback (see table below). The REM3 is the most advanced remote control, as it has all the
functionalities of a keypad (refer to the REM3 User Manual for more information). The following table describes
the visual and auditory feedback of the REM2 remote control.
NOTE: A wireless expansion module is necessary in order to use remote controls if you are using a Spectra SP
system. Please refer to your installer for more information regarding the use of remote controls with a Spectra
SP system.
Remote Control Feedback (REM2)
Full/Force Arming Feedback
Stay/Sleep Arming Feedback
Other Feedback
Arming & Disarming with StayD
StayD simplifies your life and makes it safer by protecting you 24 hours a day, 7 days a week without ever
having to disarm the system – even when entering an armed area. StayD lives with you and protects you at all
times, without any unprotected periods, and automatically re-arms the system so you don’t need to remember
to.
When entering/exiting a site, the system partly disarms to let you pass through: simply notify the system with
your remote and go through the designated path which will automatically re-arm after you pass. All other zones
remain armed. The result is a system that is always protecting, without the uncertainty of whether the system is
armed or not.
Other benefits of StayD include knowing when your kids are accessing potentially dangerous areas, such as the
balcony, pool or front door. Now you can truly have peace of mind knowing that you are always protected.
Consult your installer for more information.
To Turn On/Off StayD Mode
To turn on StayD mode:
[STAY] + [CODE] + [STAY]  StayD light on
Press the [
STAY] key followed by a valid code, then press the [STAY] key again within ten seconds. The StayD
light will light up to confirm StayD activation, and the system will be in Stay mode.
Action Visual Feedback Auditory Feedback
Disarming Green on Two beeps
Exit delay Red / green slow flash Confirmation beep
Arming / Entry Delay Red on Confirmation beep
Alarm Red fast flash Alarm beep
Action Visual Feedback Auditory Feedback
Disarming Green on Two beeps
Exit delay Yellow / green slow flash Confirmation beep
Arming / Entry Delay Yellow on Confirmation beep
Alarm Red fast flash Alarm beep
Action Visual Feedback Auditory Feedback
PGM on/off Yellow on Confirmation beep