Specifications

71
Menu Æ CHART Tab Æ 2-Depth Contour
Select the maximum depth for which the depth contours should be
displayed and push Enter. For example, select 10 meters/33 feet to
display depth contours down to 10meters/33 feet depth. Select All to
display all the depth contours.
 Displaying Colored Depth Contours
You can choose how the display varies according to depth.
Menu Æ CHART TabÆ 3-Colored Depth
Select the depth at which the display color should change and push Enter.
For example, select 5 meters/16 feet to change the display color for every
5 meters/16 feet of depth or select None to use the same color for all
depths.
Note: The depths are displayed in grayscale on the FX324 MAP and in
color on the FX324 MAP Color.
 Displaying Light Sectors
You can choose whether or not to display the signal light sectors; that is,
whether or not the different lighthouse sectors are visible.
Menu Æ CHART Tab Æ 4-Light Sectors
Select Yes (visible) or No (invisible) and push Enter.
 Displaying Sounding Points
You can choose whether or not to display sounding points.
Menu Æ CHART Tab Æ 5-Spot Sounding
Select Yes (visible) or No (invisible) and push Enter.
 Displaying Navigation Aids
You can choose whether or not to display navigation aids such as,
seamarks, wrecks, buoys and beacons, etc.
Menu Æ CHART Tab Æ 6-Navaids
Select Yes (visible) or No (invisible) and push Enter.
 Displaying Names
You can choose whether or not to display names on the chart.
Menu Æ CHART Tab Æ 7-Names
Select Yes (visible) or No (invisible) and push Enter.