Specifications

32
5. Reading the Navigation Information
The two Navigation screens display all the essential information
concerning your navigation: speed and course over the ground, distance
traveled, cross track error, etc.
Note: If you are using your GPS for the first time, see Using your FX324
MAP for the First Time.
Navigation Screen No. 1
This screen can be displayed at any time by pushing the Nav button once
or twice.
Example: The screen below displays your speed in knots, your course in
degrees, two distance counters in nautical miles and your cross
track error (XTE) in nautical miles.
Note: If the screen that is displayed is different after pushing the Nav
button, push the Nav button again.
 Speed
Your speed over the ground is displayed in the selected unit of
measurement.
See Navigation Menu to change the units and set the speed filter.
 Course
Your course over the ground is expressed in degrees. The course can
only be calculated when you are moving. If you are not moving, dashes
are displayed.