Operating instructions

Magellan CrossoverGPS 3
Magellan CrossoverGPS Right Side View
Magellan CrossoverGPS Left Side View
Power - Press and hold to turn the Magellan
CrossoverGPS on or off. (Note: The reset
switch MUST be in the up (1) position.)
USB Connection - (under protective cover)
Used for connecting to a personal computer
to upgrade the firmware.
Headphone Connector - (under protective
cover) Please check local laws for use of
headphones while driving.
External Power Input - (under protective
cover) Connects power to the Magellan
CrossoverGPS from a cigarette lighter
adapter or an approved AC adapter.
SD Card Slot - (under protective cover) Used
to accept an optional SD card. The SD card
can be used to store music and photos as well
as optional region maps.
Reset - (under protective cover) Should the
Magellan CrossoverGPS not function or during
firmware updates you may be required to reset
the unit. (The Magellan CrossoverGPS will
operate only if the reset switch is in the up
position.)
Hold Button - (under protective cover) Used to
turn off the touchscreen portion of the display
and sets the receiver into a power saving mode.
Primarily used for outdoor use where the
Magellan CrossoverGPS might be in a pocket or
backpack.