Owner's Manual

ManualsBrandsMagellan ManualsGPSMagellan Content Manager

Magellan Content Manager 2.0

Installing the Magellan Content Manager.

1. Download the Magellan Content Manager from www.magellangps.com.

2. Double click the CM_Setup file that was downloaded.

3. Click “Run” to begin the installation.

4. Select the desired language.

5. To continue with the default values, select “Next >”

6. Select “Install”.

7. The installation process will begin. A status bar is

displayed showing the progress of the installation.

8. Select “Finish” when the installation is complete.

Summary of content (7 pages)

PAGE 1
Magellan Content Manager 2.0 Installing the Magellan Content Manager. 1. Download the Magellan Content Manager from www.magellangps.com. 2. Double click the CM_Setup file that was downloaded. 3. Click “Run” to begin the installation. 4. Select the desired language. 5. To continue with the default values, select “Next >” 6. Select “Install”. 7. The installation process will begin. A status bar is displayed showing the progress of the installation. 8.
PAGE 2
Using the Magellan Content Manager for the First Time 1. Connect your Magellan receiver to your computer using a USB cable. Allow time for the receiver to connect to your computer. 2. If the Content Manager didn’t start following the installation of the software, start the Content Manager by opening the Content Manager icon that was placed on your desktop. 3. Login: Enter your email address and the password you created when you created your account at www.magellangps.com.
PAGE 3
The icons below the addresses indicate if new firmware or maps are available for your receiver after you have checked for updates. If the icons are active, you can select them to install the updates. 6. Select the Sync icon to begin syncing all the addresses currently in your receiver to the Content Manager. 7. The addresses contained in your receiver are now listed in the Address Book for the Content Manager. Adding an Address (Do not use periods in the address. Addresses with periods, i.e., “St.
PAGE 4
Editing an Address (Do not use periods in the address. Addresses with periods, i.e., “St.”, will not validate properly.) 1. You can edit an address in the Address Book using Content Manager. 2. Highlight the address you want to edit. 3. The address box will popup in the upper right portion of the display. 4. Select the “Edit” button. 5. Make the required changes and select “Save”. Deleting an Address 1. You can remove an address from the Address Book using Content Manager. 2.
PAGE 5
. Software download progress bar appears. 6. Disconnect the receiver and select OK. Restart your receiver and connect it back to your PC. 7. Map update download progress bar appears. 8. When map update is completed select OK.
PAGE 6
Addition Content Page Access the Additional Content page by selecting the bar to the right of the window that says “Additional Content”. The Additional Content page will display any additional maps that you have purchased. Click on “See What’s New” to view a list of new maps that are available for your receiver. When you highlight one of the maps in the list, the Details field will display information about that map.
PAGE 7
The Device Information Page Access the Device Information page by selecting the bar to the right of the window that says “Device Information”. This page provides information on the model of your receiver, the serial number and what software version is installed. Below the Device Profile is the Mileage Report. The Mileage Report is not supported by all receiver models. To the right are graphical representations of the Device Memory and Card Memory if an SD card is installed.