User`s guide

Chapter 2 Installing the Display

 Turn off the computer and unplug the power cord.

 Connect the signal cable to the VGA port on the back of the computer.

 Connect the power cord to wall outlet and LCD monitor.

 Press the button, located on the right side of the main unit to turn the

monitor on, then turn the computer on. If the monitor displays an image, the

monitor is successfully installed. If no image is displayed, check all

connections.

Refer to the owner’s manual of the computer for connections.

In the process of connecting external equipment, do not connect any AC power

cords to wall outlets until all other connections are completed.

Chapter 2

Installing the Display

Connecting Your LCD Monitor to a Computer

Connect to the D-SUB port

NOTE:

Unplug the monitor before installation to avoid electric shock or

damage.

Connect to power source