5’’/17’’/19’’ LCD MONITOR USER’S GUIDE B516/B716/B916 (LP517/LP717/LP917)
©2006 by MAG®. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as icons, screen displays, looks, etc. All MAG® product names mentioned in this publication are trademarks of MAG. Other company trademarks are also acknowledged.
Contents Table of Contents CE Marking Declaration Of Conformity .......................................................4 Federal Communications Commission (FCC) Statement..........................5 Important Safety Instructions ......................................................................6 Chapter 1 Introducing the Display Features.......................................................................................9 Package Contents ...............................................................
Recycling Place Recycling Place PGL Europe B.V. (Proview Group Limited Rotterdam) Satijnbloem 37, 3068 JP Rotterdam Hollande David Hsieh Tel: +31-10-238-1090 Fax: +31-10-238-1091 Email: david@proview-group.nl Xoal bvba Raketstraat 100-B1130 Bruessels Mr. Leo Starckx Tel: +32-2-702-6011 Fax: +32-2-725-2513 Email: rma@proview-repair.com leo.starckx@proview-repair.com ASIA When disposing of MAG Branded Monitors in Asia, please contact the following location to make arrangements for recycling.
FCC/CE CE Marking Declaration Of Conformity This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/EEC “Low Voltage Directive” as amended by Directive 93/68/EEC. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
FCC/CE This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Important Safety Instructions Important Safety Instructions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. Important Safety Instructions This symbol indicates caution points. This symbol indicates actions that should not be done. This symbol indicates actions that must be performed.
Important Safety Instructions • Remove the plug from the wall outlet if the equipment will not be used for a long period of time. • Never expose the equipment to liquid, rain, or moisture. Seek qualified service if any of the above is spilled into the equipment. • Do not attempt to service the equipment yourself. • Opening and removing the covers may expose you to dangerous voltage or other hazards and may void your warranty. Refer service to qualified personnel.
Important Safety Instructions • If any of the following conditions occur, unplug the power cord from the outlet and request service from qualified personnel. a. The power cord or plug is damaged. b. Liquid is spilled into the product . c. An object falls onto or into the product. d. The product has been dropped or damaged. e. The product’s display is abnormal.
Chapter 1 Introducing the Display Chapter 1 Features • FAST RESPONSE TIME The faster response time is good to video or animation to reduce residual image effect. While playing 3D games or watch video, it can enhance fluent video streaming. • SUPERIOR BRIGHTNESS & CONTRAST High brightness can make images vivid and higher contrast results in sharper difference between black and white colors. This feature is able to make the images displayed true to nature and colors saturated with the gradation.
Chapter 1 Introducing the Display Package Contents Make sure all of the following contents are included in the box. If any items are missing, please return this product to the original place of purchase.
Chapter 1 Introducing the Display Front View and Controls B516/B716/B916 ENGLISH 3 MENU MENU AUTO AUTO 1 4 2 5 LP517/LP717/LP917 3 MENU DOWN UP AUTO 1 4 2 5 ITEM DESCRIPTION MENU Press once to display the OSD (On Screen Display). And press to activate the items you highlight . ▲▼ DOWN/UP In OSD mode, press the ▲▼/DOWN/UP buttons to move the selection highlight to the next menu item counterclockwise or clockwise, respectively.
Chapter 2 Installing the Display Chapter 2 Installing the Display Refer to the owner’s manual of the computer for connections. In the process of connecting external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting Your LCD Monitor to a Computer Turn off the computer and unplug the power cord. Connect the signal cable to the VGA port on the back of the computer. Connect the power cord to wall outlet and LCD monitor.
Chapter 2 Installing the Display NOTE: The LED indicator is green when the monitor operates normally and will turn to amber when in power saving mode. When the monitor is off, the LED turns dark. Installing Your LCD Monitor Follow the instructions below to set up and install the monitor. The package contains: Display unit Stand DISPLAY UNIT STAND Cover an even stable surface with a soft cloth. Place the unit face-down on the cloth.
Chapter 2 Installing the Display In order to ensure a healthy and relaxed body position when using the monitor at visual display workstations, you are able to adjust the monitor’s angle of the stand. The angle of the LCD monitor may be adjusted approximately 30 degrees.
Chapter 3 Using the OSD Menu Chapter 3 ENGLISH Using the OSD Menu Using the OSD Menu To create the best picture, your monitor has been preset at the factory with the Preset Mode Timing shown on page 19. The OSD (On Screen Display) Menu allows the user to adjust various settings and options by following the steps below. Press the MENU button to display the OSD. The OSD main menu provides an overview of the selection of controls available.
Chapter 3 Using the OSD Menu The OSD Options The OSD menu includes the following options: BRIGHTNESS O BRIGHTNESS Controls the overall brightness. CONTRAST Controls the difference between the brightest and darkest regions of the picture. H. POSITION Adjusts the position of the picture left and right in the window. V. POSITION Adjusts the position of the picture up and down in the window. H.SIZE Adjusts the width of the picture.
Chapter 3 Using the OSD Menu RED COOL WARM Select User Mode Allows the user to adjust red, green and blue color component levels independently. COOL Inclines colors toward the blue end of the spectrum. Fixes the red, green and blue component levels at factory settings; they cannot be independently adjusted. WARM Inclines colors toward the red end of the spectrum. Fixes the red, green and blue component levels at factory settings; they cannot be independently adjusted. EXIT Exits the OSD menu.
Chapter 3 Using the OSD Menu OSD Changes the position of the OSD. H. POSITION Moves the OSD left and right in the window. V. POSITION Moves the OSD up and down in the window. EXIT Exits the OSD menu. EXIT Exits the OSD.
Chapter 4 Technical Information Chapter 4 ENGLISH Technical Information Preset Mode Timing Chart The screen image has been optimized during manufacture for the display modes listed below. Video signal: (IBM PC/AT) Dot X Line Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 400 31.47 70.00 640 x 480 31.47 60.00 37.86 72.80 37.50 75.00 35.16 56.25 37.88 60.30 48.08 72.20 46.87 75.00 48.36 60.00 56.48 70.10 60.02 75.00 63.98 60 79.
Chapter 4 Technical Information D-SUB Connector PIN Assignment 1 6 5 10 11 15 PIN DESCRIPTION 1 Red 2 Green 3 Blue 4 Ground 5 Self Test 6 Red Ground 7 Green Ground 8 Blue Ground 9 5 VDC 10 Ground 11 Ground 12 SDA (FOR DDC) 13 H. Sync 14 V.
Chapter 4 Technical Information Plug and Play Visual Inspection Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault free LCD display. A few isolated permanently lit or unlit pixels may be present. The maximum permitted number of pixel faults is stipulated in the stringent international standard ISO 13406-2 (Class II). Example: A 17” flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels.
Chapter 4 Technical Information Troubleshooting Before consulting service personnel, check the following chart for a possible cause and solution to the trouble you are experiencing. Monitor will not turn on • Make sure the power cord is plugged in. No picture • Make sure the power cord is plugged in. • Check the signal cable connecting the LCD monitor and the computer (refer to page 12). • Press the button on the front panel of the monitor.
Chapter 4 Technical Information Specifications LCD Panel B516 B716 B916 Panel Size 15” TFT LCD 17” TFT LCD 19” TFT LCD Brightness 250 260 280 Contrast Ratio 500:1 500:1 500:1 Dot Pitch 0.297mm x 0.297mm 0.264mm x 0.264mm 0.294mm x 0.294mm Max.
