Instructions

Section 5
10
S
Operation - Getting the most out of Your ML150LR
™
/ML150LRS
™
LED Rechargeable Flashlight System
Switch Operation
Your Flashlight’s Function Sets and the Functions
Within Each Set
The ML150LR™/ML150LRS™ LED flashlight includes powerful new
electronics, providing five different functions to choose from. Because
not all functions are equally important to all users, the ML150LR™/
ML150LRS™ LED flashlight offers an array of USER-CONFIGURABLE
FUNCTION SETS that LET YOU PERSONALIZE the settings for QUICKEST
ACCESS to the FUNCTIONS YOU USE MOST. The four available
Function Sets are shown in the below Function Sets Chart.
The five different functions are: – Full Power, Low Power, Strobe (flashes 12
times per second), Eco and Momentary On/Off (stays on only while the switch
button is held down). Not all of these
functions are equally important to every
user. That is why these functions are organized into four different function sets
– so that you can personalize your flashlight to suit your needs, configuring it
for
quickest access to the functions that best match your preference.
How To Choose A Function Within a Set - “Quick Click”
The available function sets, and the functions within each one, are shown in
the Function Sets Chart.
As it comes out of the package, your ML150LR™/ML150LRS™ LED flashlight
is set to the “General (Default)” function set (Function Set #1 in the chart). If you
require only those three functions (Full Power, Low Power and Eco), then you
never have to change it. You can select a function within that set by the “Quick
Click” method: Turn the flashlight on with one Quick Click and it is on at Full
Power. Turn it off, then turn it on with two Quick Clicks (about as fast as you
would say “Click Click”) and it turns on at the Low Power function. Turn it off,
then turn it on with three Quick Clicks (about as fast as you would say “Click
Click Click”) and you have the Eco function.
Selecting a function within any of the other function sets works the same way
– starting with the flashlight off, invoke the desired function by applying 1, 2 or
3 “Quick Clicks”, as the chart shows. For example, if you are in “Outdoor”
function set (Function Set #2) and you want to select the Strobe function, begin
with the flashlight off, apply three Quick Clicks, and your flashlight will strobe.
How To Go From One Function Set To Another
Your ML150LR™/ML150LRS™ LED flashlight’s “General (Default)” setting is Function Set
#1. If you want to keep that setting you don’t have to do anything. Function Set #1 will
always be in effect unless it is changed. If you want to choose a different function set,
follow these steps:
1 GENERAL
2 OUTDOOR
3 LAW
ENFORCEMENT
4 TACTICAL
(Default)
Function Set
Full Power
Low Power
Eco
Full Power
Low Power
Strobe
Momentary
Full Power
Eco
Momentary
Full Power
Strobe
Function Sets Chart